Filter
Top Products
24
Recording a source
Make all connections between the tape deck and the receiver as
shown in the “Audio equipment connections” diagram (page 6).
1. Insert a blank tape into the tape deck.
2. Press the input selector button for the source you want to
record.
•
If you select DVD, VIDEO-1 or VIDEO-2, only the audio will
be recorded.
•
If you select FM or AM, set the tuner to the station you want to
record.
3. Set the tape deck in recording mode. Start playing the
source.
Set the proper recording level using the controls on the tape
deck.
•
Please read the corresponding instruction manuals for more
information on how to operate the corresponding equipment.
If the tape deck has three heads, the signal just recorded can be
monitored:
Press the TAPE (MONITOR) button. The TAPE MONITOR indi-
cator appears on the display.
To stop monitoring, press the TAPE (MONITOR) button again.
The TAPE MONITOR indicator turns off.
•
You cannot use the monitor function with the MULTI-CH
INPUT button turned on.
•
Refer to the tape deck’s instruction manual for more details.
Recording an audio source
Monitoring
Tape deck
(TAPE)
Turntable
CD player
DVD
VCR, VDP
1·3 3
2
BASS
TREBLE
C D
PHONES
DIMMER
AUDIO
VIDEO
CONTROL
RECEIVER
TX-DS474
SCAN GROUP
AMFMDVD PHONO
1
VIDEO
2
VIDEO
TI CH
INPUTMUL
TAPE
( )
MONITOR
STANDBY
TUNINGPRESET
PARAMETER CONTROLLER
PARAMETER SELECTOR
CLEAR
MEMORY
FM MUTE
/
MODE
SPEAKERSA B MIDNIGHT THEATERSURROUND MODE
MASTER VOLUME
HIGH CURRENT DISCRETE OUTPUT STAGE AMPLIFIER
OFF
ON
POWER
STANDBY/ON
1
C D
AMFM
DVD
PHONO
1
VIDEO
2
VIDEO
2
TAPE
( )
MONITOR