Filter
Top Products
17
This deck requires no lubrication.
Head, Pinch Roller and Capstan Cleaning
Playback sound quality can be greatly diminished if magnetic
particles are allowed to accumulate on the recording/playback
head or playback head. Be sure to clean the head periodically,
normally 2 - 3 times a month, to maintain your deck’s original
performance. Dirty heads may cause:
• Poor sound quality (lose of high frequency response)
• Decreased volume
• Skipping
• Incomplete erasure of previous recordings
If the pinch rollers and capstan are dirty, the tape may become
tangled and damaged by wrapping around the pinch roller and
capstan.
To prevent these problems, clean the heads, pinch rollers and
capstans with a cotton swab dipped in cleaning fluid.
Demagnetizing
Residual magnetism builds up in the heads after the cassette deck
has been used for an extended period of time. This buildup
introduces noise and static into tapes and impairs high frequency
response. To prevent this, demagnetize the heads with any
commercially available head eraser once every 50 hours of use.
Refer to the instruction manual of the head eraser for detailed
instructions.
REC/PB head
Erase head
Capstans
Pinch rollers
Cassette Deck
Maintenance