Filter
Top Products
10
Front & Rear Panels—Continued
A DIGITAL IN OPTICAL & COAXIAL
These optical and coaxial jacks can be used to con-
nect a CD or DVD player and other components
with digital audio outputs.
B AM ANTENNA
These push terminals are for connecting an AM
antenna.
C FM ANTENNA
This jack is for connecting an FM antenna.
D MONITOR OUT
The composite video output should be connected to
a video input on your TV or projector.
E FRONT SPEAKERS B
These push terminals are for connecting speaker
set B.
F FRONT SPEAKERS A, SURROUND
SPEAKERS & CENTER SPEAKER
These push terminals are for connecting speaker
set A.
G VOLTAGE SELECTOR (only some models)
This voltage selector provides compatibility with
power systems around the world.
H
This (Remote Interactive) jack can be con-
nected to the jack on another Onkyo compo-
nent. The AV receiver’s remote controller can then
be used to control that component. To use , you
must make an analog audio connection (RCA)
between the AV receiver and the other component,
even if they are connected digitally.
Note:
can only be used with Onkyo components.
I CD IN
These analog inputs can be used to connect a CD
player with analog outputs.
J TAPE IN/OUT
These analog inputs and outputs can be used to con-
nect a cassette recorder, MiniDisc recorder, or other
recorder with analog inputs and outputs.
K VIDEO 1 IN/OUT, VIDEO 2 IN & VIDEO 3 IN
The VIDEO 1, composite video, and audio inputs
and outputs can be used to connect a VCR. The
VIDEO 2, VIDEO 3, composite video, and audio
inputs can be used to connect another video source
(e.g., cable TV, satellite TV, or a set-top box).
L DVD IN/MULTI CH INPUT
The FRONT, SURROUND, CENTER, and SUB-
WOOFER jacks can be used to connect a compo-
nent with an analog multichannel audio output, such
as a DVD player with a 5.1-channel analog output.
The composite video input should be connected to a
video output on the DVD player.
Rear Panel
8 9 J K L
1 B 3 4 5 76
See pages 17–31 for connection information.