Filter
Top Products
En-41
Advanced Operations
On-screen Setup
With the AV receiver connected to a TV, there are two
ways of changing the settings on-screen: using the Quick
Setup or the Setup Menu (HOME).
■ Quick Setup
The Quick Setup provides quick access to frequently used
settings. You can change settings and view the current
information.
■ Setup menu (HOME)
The Setup menu (HOME) provides a convenient way to
change the AV receiver’s various settings. Settings are
organized into 11 categories.
Note
• The on-screen menus are displayed when:
– There is no video input, or
– The video input is 480p, 576p, 720p, 1080i, or 1080p.
Explanatory Notes
Setting target
Setting options (default setting underlined)
■ Input
`You can select input sources and view information on
their assignments.
Use / to select an input source and view its
assignment information.
Pressing ENTER switches to the selected input
source.
■ Audio (➔ page 42)
`You can change the following settings: “Bass”,
“Treble”, “Subwoofer Level”, “Center Level”,
“Audyssey”, “Dynamic EQ”, “Dynamic Volume”,
“Late Night”, “Music Optimizer”, and “Cinema
Filter”.
■ Information
*1
`You can view the information of the following items:
“Input” and “Output”.
■ Listening Mode
*2
`You can select the listening modes that are grouped in
the following categories: “MOVIE/TV”, “MUSIC”,
“GAME”.
Use / to select the category and / to select the
listening mode. Press ENTER to switch to the
selected listening mode.
Note
*1
Depending on the input source and listening mode, not all
channels shown here output the sound.
*2
• This setting is not available in either of the following cases:
–The “Audio TV Out” setting is set to “On” (➔ page 52).
–“HDMI Ctrl (RIHD)” is set to “On” (➔ page 52) and
you’re listening through your TV speakers.
The on-screen menus appear only on a TV that is
connected to HDMI OUT. If your TV is connected to
other video outputs, use the AV receiver’s display
when changing settings.
This section describes the procedure for using the
remote controller unless otherwise specified.
Using the Quick Setup
1
Press RECEIVER followed by QSETUP.
The Quick Setup will be superimposed on the TV
screen.
2
Use / and ENTER to make the desired selection.
Press Q SETUP to close the menu.
Press RETURN to return to the previous menu.
Q SETUP
RECEIVER
ENTER
/ / /
■ Music Optimizer
`Off
`On
Input
Audio
Information
Listening Mode
[ENTER:Select]
Quick Setup