Filter
Top Products
12
En
Connecting the Speaker Cables
Screw-type speaker terminals
Push-type speaker terminals
The following illustration shows which speaker should be connected to each pair of terminals.
*
(HT-S5305) Using the supplied RCA cable, connect the subwoofer’s LINE INPUT jack to your AV receiver’s SUBWOOFER
PRE OUT jack.
Strip 12 to 15 mm of insulation from
the ends of the speaker cables, and
twist the bare wires tightly, as
shown.
(HT-S5305: Supplied speaker cables
are already stripped.)
Strip 10 to 12 mm of insulation from the ends of the speaker
cables, and twist the bare wires tightly, as shown.
(HT-S5305: Supplied speaker cables are already stripped.)
12 to 15 mm
10 to 12 mm
Front
right
speaker A
Front
left
speaker A
Center
speaker
Powered subwoofer
Front
right
speaker B
Front
left
speaker B
Surround
right
speaker
Surround
left
speaker