Filter
Top Products
6
Various Mounting Methods
If you intend to stand the front speakers on the floor or
on a TV stand or AV stand, you should attach the sup-
plied front speaker bases. To do this, align the mounting
holes in the base with base inserts on the front speaker’s
rear panel, and secure by using four of the supplied fix-
ing screws.
The center speaker base is for mounting the center
speaker horizontally. If you put it on a TV stand or AV
stand, aim it toward the listening position. The center
speaker should sit securely on the base. If it’s loose, try
resetting it.
Note:
• If you put the center speaker on the floor, take it off the
base and position it so that it’s facing slightly up
toward the listener’s ears.
The front speakers, center speaker, surround speakers,
and surround back speaker (SKS-HT240 only) can eas-
ily be wall mounted by using the keyhole slots. To pre-
vent the speaker from vibrating against the wall, attach
four of the supplied spacers to the keyhole fins on the
rear of each speaker.
■
Mounting vertically
To mount the front speakers, surround speakers, or sur-
round back speaker (SKS-HT240 only) vertically, use
the keyhole slot shown to hang each speaker on a screw
that’s securely screwed into the wall.
Front speaker
Surround/Surround Back speaker
Front Speaker Bases
Center Speaker Base
Base inserts
Mounting holes
Base for horizontal
mounting
Wall Mounting
2-9/16"
(65 mm)
2-9/16"
(65 mm)
4-7/8"
(125 mm)
Keyhole slot for
vertical wall
mounting
Bottom
Spacers
Spacers
1-13/16"
(45 mm)
2-9/16"
(65 mm)
2-9/16"
(65 mm)
Keyhole slot for
vertical wall
mounting
Bottom
Spacers
Spacers