Filter
Top Products
67
Advanced setup
—Continued
• Digital output
This specifies whether digital audio will be output from the DV-S155X’s digital output jack.
On:
The digital jack will output digital audio signals.
Off:
The digital jack will not output digital audio signals.
■
Linear PCM Out setting
Down Sample On:
Choose this setting if you’ve connected the
DV-S155X to an AV amp that does not support 96
kHz audio. (This is the default setting.)
Down Sample Off:
Choose this setting if you’ve connected the
DV-S155X to an AV amp that supports 96 kHz audio.
Note
• Some discs will forcibly convert to 48/44.1 kHz even if you choose “Down Sample Off,” or
may not produce digital output.
• 96 kHz linear PCM audio from a copy-protected DVD video is automatically converted to
48 kHz for output, or is output as analog audio.
• This setting applies to both “Digital Out/Digital1” and “Digital Out/Digital2.”
■
Dynamic Range Control setting
The Dynamic Range Control setting lets you compress the audio so that loud sounds will be
softer and soft sounds will be louder. This is convenient when you find it difficult to hear the
dialog of a movie, or when watching a movie late at night.
Off (default):
Dynamic Range Control will be off.
On:
Dynamic Range Control will be on. Loud sounds
such as explosions will be softer, and dialog will be
easier to hear.
Note
• Dynamic Range Control only works for Dolby Digital sound.
• This setting automatically reverts to Off when the DV-S155X is turned on.