Filter
Top Products
En-24
Setting for MP3/WMA
The MP3/WMA preferences let you change the way
MP3/WMA file information is displayed and the way
MP3/WMA CDs are played.
The MP3/WMA preferences can be set only when
playback is stopped.
1
Press the [SETUP] button.
2
Use the []/[] buttons to select the
preference you want to change.
The preferences are explained in the next column.
3
Press the [ENTER] button.
4
Use the []/[] buttons to select the
preference’s options.
To cancel the procedure at any point, press the []
button.
5
Press the [ENTER] button.
When the preference has been set, “COMPLETE”
appears on the display.
Preferences
Below, the name of each preference is followed by its
options in parentheses, with the default option in bold.
❏ DISC NAME (Display/Not)
This preference determines whether the disc name is
displayed when an MP3/WMA disc is loaded.
❏ FILE NAME (Scroll/Not)
This preference determines whether the file name scrolls
across the display when an MP3/WMA file is selected.
❏ FOLDER NAME (Scroll/Not)
This preference determines whether the folder name
scrolls across the display when an MP3/WMA folder is
selected.
In Navigation mode (see page 18), the folder name
scrolls across the display regardless of this setting.
❏ BAD NAME (Replace/Not)
This preference determines whether file and folder
names that contain undisplayable characters are replaced
with “File n” or “Folder n,” “n” being the file or folder
number. When set to Not Replace, displayable charac-
ters are displayed and underscore characters are used in
place of any undisplayable characters.
For ID3 tags, underscore characters are used in place of
undisplayable characters regardless of this preference.
Note:
File and folder names are scrolled in Navigation mode
(page 18) regardless of the FILE NAME and FOLDER
NAME preferences.
❏ ID3 VER. 1 (Read/Not Read)
This preference determines whether version 1.0/1.1 tags
are read and displayed. When set to Not Read, version
1.0/1.1 tags are not displayed.
❏ ID3 VER. 2 (Read/Not Read)
This preference determines whether version 2.2/2.3/2.4
tags are read and displayed. When set to Not Read,
version 2.2/2.3/2.4 ID3 tags are not displayed.
❏ CD EXTRA (Audio/MP3)
This preference applies to CD Extra discs and
determines whether music in the audio session or MP3/
WMA files in the data session are played.
❏ JOLIET (Use SVD/ISO9660)
This preference applies to MP3/WMA discs in Joliet for-
mat and determines whether the CD-Player reads the
SVD data or treats the disc as an ISO 9660 disc. Nor-
mally, this preference doesn’t need to be changed.
SVD (Supplementary Volume Descriptor) supports long
file and folder names and characters other than letters
and numbers. Some CD burning software refers to the
Joliet format as “Windows format.”
❏ HIDE NUMBER (Disable/Enable)
This preference determines whether the numbers at the
beginning of file and folder names are hidden.
When you create an MP3/WMA CD on a personal com-
puter, you cannot normally determine the playback order
of the files. However, if you number the MP3/WMA files
in order, starting with 01, 02, 03, and so on, they will
play in that order. If you don’t want these numbers to
appear on the display, choose Enable.
The following table shows a few examples of numbered
file and folder names and how they will appear with the
Disable and Enable options.
Setting MP3/WMA Preferences
SEARCH MEMORY
SETUP
123
RANDOM REPEAT
ENTER
ENTER
/
SETUP