Filter
Top Products
16
Enjoying Audio Sources—Continued
Selecting the Input Source
Adjusting the Volume
Muting the A-9377
You can temporarily mute the output of the A-9377.
Using the Direct Function
With the Direct function, you can bypass the tone con-
trols for a purer sound.
Note:
• The BASS and TREBLE tone controls have no effect
while the Direct function is on.
Listening to Components
Use the Input Selector to select
the source component you want
to listen to.
LINE: Component connected to the
LINE jacks.
DOCK: Component connected to the
DOCK jacks.
PHONO: Turntable connected to the
PHONO jacks.
CD: Component connected to the CD
jacks.
TUNER: Component connected to the
TUNER jacks.
TAPE: Component connected to the
TAPE IN jacks.
You can also use the remote control-
ler’s INPUT [ ]/[ ] buttons to select
the input source.
TONE/DIRECT
MUTING
INPUT
VOLUME
/
/
Input SelectorVolume control
Remote
controller
To adjust the volume, use the
A-9377’s Volume control, or the
remote controller’s VOLUME
[ ]/[ ] buttons.
Turn the Volume control clockwise to
increase the volume; counterclock-
wise to decrease it.
Press the remote controller’s
[MUTING] button.
The output of the A-9377 is muted and
the MUTING indicator flashes.
To unmute the A-9377, press the
[MUTING] button again.
The Mute function can also be can-
celled by adjusting the Volume control
or pressing the remote controller’s
VOLUME [ ]/[ ] buttons.
Press the A-9377’s
[TONE/DIRECT] button.
The tone controls are bypassed and the
TONE/DIRECT indicator lights up.
To turn off the Direct function,
press the [TONE/DIRECT] button
again.
The Direct function turns off and the
TONE/DIRECT indicator goes off.
Remote
controller
Remote
controller