Omnimount 10.0 WALL/CEILING B Speaker System User Manual


  Open as PDF
of 3
 
10.0SPEAKERMOUNTUSER’SGUIDE
REQUIREDTOOLS
A.5/32”hexwrench(supplied)
Drillbits:
B.Wood5/32”
C.Drywall¼”
D.Masonry5/16”carbidetipped
E.Crescentor7/16”(11mm)openendwrench
F.Phillipsscrewdriver
G.Electricdrill
H.Hammer(masonryonly)
GB
MOUNTINGOPTIONS
Possibilitésdemontage
Posibilidadesdeinstalación
Montagemöglichkeiten
Opzionidimontaggio
Montageopties
1.SPEAKEROPTIONS
A)¼”20ThreadedInsert C)MountingPlate
B)KeyholeInsert D)WoodSpeakerWithoutThreadedInserts
Use3/32”drillbit(supplied)
Maximumdrilldepth:½”
2.CLAMPASSEMBLYORIENTATION
A)WallMount
A)CeilingMount
3.MOUNTINGTHECLAMPASSEMBLY
A)MarkLocation
Markmountingholeswithpencil
B)MountingontoWoodenStud.Use5/32”drillbit
Minimummountingholedepth:2”(51mm)
C)DrywallMounting
Use¼”drillbit
Insertanchorintohole
D)MountingintoMasonry
5/16”(8mm)carbidetippedbitandmasonryorhammerdrill.
Weareyeprotection.
Minimummountingholedepth:2”(51mm)
Insertanchorintohole
E)MountClampAssembly
Attachclampassemblywithsuppliedscrews.
.
4.JOININGBALLSHAFTANDCLAMPASSEMBLY
Openclampassemblyenoughtoacceptball.
“Pop”ballintotheclampassembly.
Setspeakertodesiredposition.
Tightenclampassemblyuntilsnug.
Note:Speakerweightmustbefullysupported
duringthetighteningprocess.
5.FINALADJUSTMENTS
Usetooltotightenin1/2turnincrements.
Donotovertighten.
Tochangespeakerangle,loosentensionscrew,
repositionspeaker,thenretightentensionscrew.
Torotatespeakercabinet,loosenjamnut,rotate
speakerintodesiredposition,thenretightenjamnut
PART#:1002013
next