Nuvo NV-T2FX Stereo System User Manual


 
Congratulations on your purchase of the NuVo T2 dual Tuner. With the T2 Dual Tuner, broadcast music enters the twenty-first
century. Finally you can enjoy state-of-the-art, advanced radio and satellite receiver technology, with astonishingly clear
reception throughout the entire home.
Combined with the NuVo Concerto Whole Home Audio Distribution System, the T2 gives you the ultimate radio experience with
Radio Data Service. RDS displays artist and song information on the Concerto Display Pads, which means no more waiting to hear a
song title, only to be disappointed when the station cuts to a commercial. Interference Adaptive Signal Processing (IASP)
circuitry combined with NuVo’s patent pending Remote Active Antenna provide remarkable radio reception, even when radio
stations are typically difficult to receive. The T2 XM satellite tuner provides the full range of stations direct into your home.
Listening selections are streamed in real time to all the Display Pads throughout the NuVo Concerto System. The included XM
antenna makes satellite reception for the home easy and reliable.
The T2 is packed with many powerful features, and is designed to integrate seamlessly with any distributed audio system. This
manual is a guide to making the installation complete, and for making the most of your T2 Tuner. When properly installed, the T2
will provide years of listening enjoyment.
Introduction
Table of Contents:
Basic Features
Front Panel page 6
Back Panel page 7
RC3 Remote Control page 8
I. Installing the NV-T2 Dual Tuner
Stereo Audio Conncetions page 9
Direct IR Control page 9
IR Pass-Thru page 10
AM/FM and XM Antenna Input page 11
Proper Location of the XM Antenna page 12
Subscribing to the XM Service page 12
II. Front Panel Menu Controls AM/FM
Exit Menu page 13
Force Mono page 13
Brightness page 13
Advanced Settings
Operating Mode page 14
Regional Setup page 14
Fine-Tuning page 14
Seek Threshold page 14
Audio Settings page 15
Auto-On page 15
AUX Input page 16
Noise Blanking page 16
Rs232 Communication page 16
III. Front Panel Menu Control XM
Signal Status page 16
Info page 16
Advanced Settings page 16
Diagnostics page 16
XM Display Button page 16
IV. Stand-alone Front Panel Use of the T2
Tuning a Desired Station
Step Tune Mode page 17
Seek Tune Mode page 17
Scan Tune Mode page 17
Direct Numeric Tuning page 17
Radio Data Service page 17
Signal Strength/Stereo Indicator page 18
Using the Memory Feature page 18
Source Switching page 18
V. Using the T2 with the Concerto NuVoNet
Setting Up the Tuner for NuVoNet page 19
Making Sure Your Concerto Is Ready page 19
Making the Connection page 20
Operating the T2 with the Concerto Display Pad
Tuning by Categories page 20
Radio Data Service page 20
Direct Numeric Entry Tuning page 20
Source Switching page 20
V. T2 Configuration Software
1.0 Start page 21
2.0 Config page 21
3.0 Presets page 22
Advanced Settings
4.0 Advanced Config page 23
5.0 Advanced Presets page 25
6.0 Categories page 25
7.0 Update System page 26
Troubleshooting page 28
NV-T2DF Specifications page 30
Page 4