Filter
Top Products
Essentia Back Panel
1. Audio Source Inputs: The Essentia amplifier accepts up to six audio sources. A source consists of any audio component capable
of supplying a line level signal.
2. Source Link: This multi-pin connection is used to transfer the audio information from the Essentia main amplifier to the
expander amplifier. This output is used to expand the system to twelve zones. The Audio Link connection
cable is provided with the Essentia D Expander package.
3. Variable Lineout: The variable lineout is intended for zones where additional amplification is needed and the Essentia keypad
is used to control the volume of all the speakers in that zone.
4. Fixed Lineout: The fixed lineout is intended for zones where additional amplification and separate volume control are
needed.
5. Speaker Outputs: Individual stereo speaker outputs for each zone provide 20 watts output per channel.
6. Zone Triggers: These outputs provide a 12-volt output when the corresponding zone is turned on. This is used to trigger
external equipment specific to a given zone.
7. Emitter Outputs: These outputs transfer IR (infrared) signals, repeated from a zone keypad, from the Essentia amplifier to
the audio source equipment. There are six source specific outputs and two “sum” output that sends IR
signals regardless of the selected source.
8. System On: This output provides a constant 12-volt output when any zone is turned on. This is used to trigger external
devices.
9. External Mute: This is designed to mute any audio playing through the system when the phone or doorbell rings.
10. Network Input: This RJ45 connection is the input for all zone information coming from the Essentia keypads. The
connection is made using the Network Cable supplied with the package.
11. Digital Link: This multi-pin connection transfers all the digital information from the main amplifier to the expander
amplifier. This output is used to expand the system from six to twelve zones. The Digital Link connection
cable is provided with the Essentia D Expander package.
12. RS232 Port: The RS232 serial port allows two-way communication for control by a home automation system.
13. AC Power: A detachable power cable supplies power to the Essentia System from any AC outlet.
6
ZONE 6
SYSTEM
ZONE TRIGGER OUTPUTS
SOURCE LINK
SOURCE INPUTS
ZONE 1
NETWORK
EMITTER OUTPUTS
DIGITAL LINK
ZONE 3
ZONE 4
ZONE 5
ZONE 2
PROGRAM
RS-232
CONNECT TO
NV-E6DX
USE NV-SLC1
CABLE
CONNECT TO
NV-E6DEZP
USE NV-NC1
CABLE
SYS ON
EXT. MUTE
SUM1
1
1
3
5
1 3 5
2
4
6
SUM2
5
2 4
6
CONNECT TO
NV-E6DX
USE NV-SLC1
CABLE
1 2 3 4 5
6
1 2 3 4 5
6
OUTPUT POWER
OUTPUT POWER
OUTPUT POWER
OUTPUT POWER
OUTPUT POWER
OUTPUT POWER
20W/6OHM X2
20W/6OHM X2
20W/6OHM X2
20W/6OHM X2
20W/6OHM X2
20W/6OHM X2
VARIABLE
OUTPUT
VARIABLE
OUTPUT
VARIABLE
OUTPUT
VARIABLE
OUTPUT
VARIABLE
OUTPUT
VARIABLE
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
FIXED
OUTPUT
TIP=L
RING=R
TIP=L
RING=R
TIP=L
RING=R
TIP=L
RING=R
TIP=L
RING=R
TIP=L
RING=R
FIXED
OUTPUT
R
NuVo Techn ologie s Hebron KY USA
FUS E:T5 A
120 V 60Hz 50 0W
MODE L NV-6DM 2
SIX SO URCE SI X ZONE
AUDI O DISTR IBUTI ON SYST EM
www. nuvot echno logie s.com
303 3118
C
US
CON FORMS TO
UL STD .6500
CER TIFIE D TO
CAN /CSA STD .E600 65
1
2
3
4
5
6
7
8
9
10
11
12
13