Filter
Top Products
EQ Control and Source Grouping
To change bass response, press the Mute button and Source 1
button simultaneously. Adjust the bass level up or down by using
the Volume Up and Volume Down buttons. The volume indicator
LEDs will indicate the output level, fig. 8. Adjust treble response
using the same process. This is accessed by pressing the Mute
and Source 2 buttons. Once the desired setting is made, press
the Source button again to return the keypad to normal
operation.
Source grouping is a feature that allows multiple zones in an
open living space to always share the same source selection but
still retain individual volume and on/off control. This is achieved
by pressing Mute and Source 3. Volume Up enables the group
function, and Volume Down disables the group function and
causes the keypad to operate independently of all other groups,
fig. 10.
VOLUME
FLAT
-4 dB
+4 dB
+6 dB
+8 dB
-6 dB
-8 dB
Fig.10
VOLUME
Group Disabled
Group Enabled
Fig. 11
IX. Keypad Zone Settings
Each Essentia keypad has the ability to set specific zone
functions. These are bass and treble EQ, source grouping, all on
(party mode) and volume reset. Each of these functions is
accessed by pressing the MUTE and SOURCE 1-5 buttons
simultaneously, fig. 9.
While the keypad is in the function set mode, the appropriate
source button with flash. To return to normal zone control, press
the flashing source button.
Fig. 9
11
VOLUME
MUTE
CD
HD
TNR1
TNR2
SAT2
SAT 1
Press the Mute and
Source 1-5 buttons to
initiate each zone
function.
The volume indicator
LED indicates the
function being set.
Source 1
Source 2
Source 3
Source 4
Source 5