Filter
Top Products
Use the headset
13
■ Switch a call between phone and headset
To switch a call from the headset to a phone or from a phone to the headset, press
and hold the Call/End key for 2 seconds.
■ Use the headset with several phones
The headset can be paired with up to 8 phones but connected to only one phone at
a time.
The phone that was first paired with the headset is called the default phone. The
phone that was last used with the headset is called the last used phone.
If the headset is switched on within 11 yards (10 meters) of several paired phones,
the headset will try to connect to the default phone within a few seconds.
If the headset cannot connect to the default phone (for example, when the phone
is switched off or its user rejects the connection), the headset tries within a few
seconds to connect to the last used phone. If the headset cannot connect to either
of the phones, it remains available for use by other paired phones.
To use the headset with a paired phone that is not a default phone or last used
phone, create the connection in the Bluetooth menu of your phone.
■ Reset the headset
You can reset the headset to its original settings. When you reset the headset, all of
its settings, including pairing information, are cleared. You might wish to reset the
headset if you need to change the default user of the headset or phone pairings.
To reset the headset, press and hold the Power key and the Volume up key for 10
seconds. When the headset has been reset, it beeps twice, and the red and green
indicator lights flash alternately for several seconds.