Nokia BH-804 Headphones User Manual


 
Get started
8
Warning: Use only chargers approved by Nokia for use with this
particular enhancement. The use of any other types may invalidate any
approval or warranty, and may be dangerous.
When you disconnect the power cord of any enhancement, grasp and pull the plug,
not the cord.
Charge the battery
Before charging the battery, carefully read “Battery information”, p. 16.
1. Connect the charger to a wall outlet.
2. To charge the headset in the desk stand (if
provided with the headset), connect the
charger cable to the charger connector at the
side of the desk stand (1), and place the lower
end of the headset into the slot on the desk
stand (2). The headset switches off.
To charge the headset using the charger
adapter (if provided with the headset),
connect the charger cable to the charger
connector on the adapter (1), and insert
the lower end of the headset into the
adapter (2). The headset switches off.
Tip: To keep the adapter attached to the charger cable, push the
cable into the slot on the adapter.
1
2
1
2