Filter
Top Products
Basic use
14
To redial the number you last called (if your mobile device supports this
feature with the headset), when no call is in progress, press the
multifunction key twice.
To activate voice dialling (if your mobile device supports this feature with
the headset), when no call is in progress, press and hold the multifunction
key for about 2 seconds until the mobile device starts voice dialling, and
proceed as described in the user guide of the device.
When you receive a call, the blue indicator light flashes quickly, and you
hear a ringing tone through the headset. To answer the call, press the
multifunction key, or use the keys of the mobile device. To reject the call,
press the multifunction key twice, or use the keys of the mobile device.
To end a call, press the multifunction key, or use the keys of the mobile
device.
■ Adjust the volume
To adjust the headset volume, press either volume key.
■ Switch a call between headset and mobile device
To switch a call from the headset to a connected device, press and hold
the multifunction key for about 4 seconds (the headset switches off), or
use the keys of your device.
To switch the call back to the headset, switch on the headset (and
connect it to your paired device), or press and hold the multifunction key
for about 2 seconds (when the headset is switched on).