Filter
Top Products
CONFIGURATION 5 – INTEGRATING A HOME THEATER USING AN INTELLICONTROL
A Home Theater system controlled by a Niles IntelliControl can be integrated to share source components in
a system with the ZR-4630.
Audio Signals
A
udio signals for the shared sour
ce components are connected to both the ZR-4630 and the Home Theater
receiver using RCA Y-adapters (Figure 9).
Important Note: If the Home Theater receiver has shorting audio inputs, a Niles AVDA-3 Distribution Amplifier
must be used in place of the RCA Y-adapters (for more information see configuration 3).
Shar
ed Sour
ce-Component Control
The Flasher output from the IntelliControl
®
(Figure 9) is connected to the IR Input of the ZR-4630. The
IntelliControl, progr
ammed with Niles R-4 Remote IR commands, no
w can automate and control the shared
source-components. Niles R-4 IR commands are taught to the IntelliControl using the R-4 Remote itself (see
Programming Overview for more details).
A
1
2V Sync signal is pro
vided from the IntelliControl to the Home
Theater Sync Input to provide the ZR-4630
with the ON/OFF status of the Home Theater. This status enables the ZR-4630 to provide coordinated control
of the source component's power ON/OFF.
Important Note: When issuing the sour
ce component’
s actual IR commands from the Home
Theater Remote
Control, all IR commands are passed through to all source-component flasher outputs. Identical brand and
model source components cannot be operated individually using these commands. (For more information on
controlling identical br
and and model sour
ce components, refer to the Oper
ation Ov
erview on page 32.)
19
SYSTEM CONFIGURATIONS
Figure 9