Filter
Top Products
12
S TEREO A MPLIFIER/ AUTOMATED S WITCHER
Speakers
The TVA50 will remain stable when driving a 4 ohm load. If only
one pair of speakers is being driven, 4, 6 or 8 ohm
speakers systems can be used. If switching two pairs, 8 ohm
speakers must be used.
Fixed/Variable Line Level Outputs
To control the TV volume through the speakers, the variable
output on the TV must be connected to the TVA50 Line IN.
Using Volume Controls
Depending on your installation in-wall volume controls may be
used to control the speaker level. Connect the in-wall volume
control to the TVA50 speaker output. This requires use of the
fixed output on the TV. In this application, volume for all
sources is controlled with the in-wall volume control.
DS00395ACA-TVA50.qxp 6/1/04 9:51 AM Page 12