Filter
Top Products
www.nilesaudio.com
5
INSTALLATION (CONT’D)
3. Make sure the TM-XM is fully engaged and sits flush against
the GXR2.
4. Before tightening the thumbscrews, insert the cable strain
relief bracket onto the two thumbscrews.
5. Tighten thumbscrews. (Do not over tighten.)
6. Attach the antenna to the connector of the TM-XM card,
making a short loop of the antenna cable and attaching
the cable to the strain relief bracket using the supplied
wire ties.
Figure 3. Insert the relief bracket onto the two thumbscrews.
FM
ANT
TM-AM/FM
AM
ANT
L
R
CASCADE AUDIO
OUT
Niles Audio Corporation Miami Florida, USA