Filter
Top Products
12
3. Set both SVL-2 volume controls to maximum.
4. Locate the ON/OFF buttons on the SVL-2. Set both to the
ON position.
5. Turn on the amplifier or receiver and select as source, such
as the tuner or CD player.
6. Slowly turn up the amplifier or receiver volume and set it
to a comfortable (not maximum) listening level. Be careful
not to overdrive or "clip" your amplifier. If the sound
becomes muddy or distorted, you have reached the limit of
your amplifier's volume capability and should quickly reduce
the volume to avoid damaging your speakers.
7. Using the appropriate volume controls on the front of the
SVL-2, adjust the volume of the speakers to the desired listen-
ing level.
8. You can turn off the speakers by turning the appropriate
volume controls on the SVL-2 fully counter-clockwise, or by
pressing the appropriate ON/OFF buttons.
S
PEAKER
S
ELECTION
/V
OLUME
C
ONTROL
S
YSTEM
"TECH TIP"
You will need to
activate the SVL-2's
PROTECTION button
whenever the overall
system impedance
might fall below
4 ohms.