Niles Audio SI-2150 Stereo Amplifier User Manual


 
17
NILES AUDIO CORPORATION – 1-800-BUY-HIFI – 1-760-710-0992
2 Channel, BridgaBle Power amPlifiers
OpERATION
pOwER SwITCh
The front panel switch is a master or “vacation” power switch. No matter which
turn-on mode you have selected, the master power switch will turn off all
circuitry including the sensing circuitry. If you will not be using the amplier for
an extended period of time, turn the master power switch “Off” (push button
switch out). When you would like to return to normal operation, turn the switch
“On” (push button switch in).
Important Notes: Equipment is not completely disconnected from main power
source when power switch is in the “OFF” position.
pOwER LEd
The power LED indicates that the AC cord is plugged into a working AC power
receptacle and that the power switch is in the “On” position.
BICOLOR STATUS LEd
The bicolor Status LED illuminates “green” when the amplier circuitry has been
turned on by the Turn-On circuits, and illuminates “red” to indicate activation of
the amplier’s built-in protection circuitry due to either a fault in the wiring or the
speaker, or with the Niles System Integration Amplier
®
itself.
LEvEL AdjUSTmENT SCREwS
The rear panel level adjustment screws allow you to adjust the level of the Niles
System Integration Amplier
®
relative to other ampliers in your system. Use
a 1/8” slotted screwdriver to adjust the screws. If the Niles System Integration
Amplier
®
is the only amplier in your system, leave the screws at their factory
default setting (12:00 position).
CLEANING ANd mAINTENANCE
The internal parts of the Niles System Integration Amplier
®
are electronic
and require no maintenance. Once a year it is appropriate to twist the RCA
connectors on each input to remove corrosion and improve conductivity. You
can clean the amplier with soft cloth or paper towel dampened with water or a
mild detergent. Do not use any spray-type, abrasive cleaners on the amplier.