Filter
Top Products
SPECIFICATIONS
18
SPECIFICATIONS
Design Principle
Linear voltage/current amplification.
Continuous Average Power Output
125 watts per channel RMS at 8 ohms, both channels driven.
175 watts per channel RMS at 4 ohms, both channels driven.
350 watts bridged channel RMS at 8 ohms.
Input Impedance
18K ohms
Input Sensitivity
.830V for 8 ohm rated power
.720V for 4 ohm rated power
Overall Voltage Gain
31.5 dB
Frequency Response
Bandwidth Limited from 10 Hz to 70 kHz (-1 dB)
Signal to Noise Ratio
110 dB, A-weighted
Total Harmonic Distortion
8 ohms
.02% THD from 20 Hz to 20 kHz @ full rated power
4 ohms
.02% THD from 20 Hz to 10 kHz @ full rated power
Overall Dimensions
17” wide 5 1/2” high (including feet) 13-1/8” deep
Weight
26 lbs