Filter
Top Products
NILES AUDIO CORPORATION – 1-800-BUY-HIFI
7
(CONTINUED ON NEXT PAGE)
INSTALLING THE WALL-MOUNT BRACKETS
TOOLS AND PARTS
We recommend using the following tools and parts to install the PHD60/42/30 wall-mount brackets:
• Electric drill and drill bits
• Philips screwdrivers or driver bit set
• Stud finder
• Eight wood screws with (optional) dry-wall anchors rated for at least 40 pounds
• Pencil
• Level
• Protective eyewear
PRECAUTIONS
Before starting the installation, please observe the following precautions:
• Turn off all system power before making any connections.
• Always wear protective eyewear when using tools.
• Make sure hands are clean before installation.
• Wear gloves when working with fiberglass insulation.
INSTALLATION
1. At each proposed site, use a stud finder to locate studs (which should be on 16-inch
centers) for possible use in the installation. If the studs do not line up with a desired
placement location, the PHD60/42/30 wall-mount bracket can still be mounted on a dry
wall with appropriate dry-wall screws and anchors.
IMPORTANT: DO NOT USE PLASTIC EXPANSION OR THREADED WALL ANCHORS FOR DRY
WALL INSTALLATION. CONSULT YOUR LOCAL NILES DEALER OR HOME HARDWARE STORE
FOR RECOMMENDATIONS FOR YOUR HOME THEATER APPLICATION.
DS00413BCN_0-PHD.indd 9 11/18/05 2:33:01 PM