Niles Audio CM5PR Speaker User Manual


 
PLEASE FILL OUT THE
WARRANTY REGISTRATION
CARD ON THE REVERSE SIDE,
DETACH, AND MAIL TO:
Niles Audio Corporation
Warranty Registration Dept.
P.O. Box 160818
Miami, Florida 33116-0818
DETACH HERE
MicroPerf
Grilles
The CM5PR and CM6PR employ Niles
exclusive MicroPerf grille construction.
The exceptionally tight hole pattern pro-
vides acoustic transparency at all audio
frequencies and enables the speaker ele-
ments to remain invisible. MicroPerf
grilles can also be painted to blend seem-
lessly with the surrounding decor.
Easy Installation
The CM5PR and CM6PR employ a brack-
etless mounting system in existing ceilings.
Simply cut a hole in the mounting surface,
remove the grille from the speaker, con-
nect the wires and place the speaker in the
hole. Then tighten the four mounting
“dogs” via the front panel screws. The
dogs first swivel 90°, then clamp the
speaker frame to the drywall as you tight-
en the screws.
4 or 8 ohm Selectable Impedance
The dual voice coil feature of the CM5PR
and CM6PR gives the installer flexibility to
select the speaker’s impedance — 4 ohms
for systems where maximum current trans-
fer and output level is desired; 8 ohms for
systems utilizing multiple speaker pairs
where amplifier loading is a consideration.
Hole Saving Bracket
Available as an optional accessory, CM5
Series and CM6 Series New Construction
Brackets can be installed as a “hole-saver”
before the drywall goes up. The drywall
contractor cuts the holes as the drywall is
installed, reducing installation time and
minimizing the chance for lost wires.
Features and Benefits
3