Niles Audio AT5 Speaker User Manual


 
19
Installation of the Speaker and Grille in New or Existing Construction
Adjusting the Tweeter
The tweeter is housed in a precision adjust-
ment mechanism which enables precise
aiming of the directional high frequencies to
provide optimum performance. To adjust
the tweeter:
1. Carefully grasp the tweeter housing by
placing your thumb and forefinger in the
indentations provided.
2. Rotate the tweeter housing either clock-
wise or counter clockwise as required.
The mechanism is indexed at equal
intervals so that both speakers in a pair
can be adjusted equally. Simply count
the number of clicks as the first tweet-
er is adjusted. Repeat the process for the
second speaker, rotating the tweeter the
same number of clicks in the opposite
direction
(See Figure 19).
3. Pivot the tweeter on both speakers
equally by depressing the housing at the
arrows until the desired angle is
achieved
(See Figure 20).
Installing the Grille
Carefully fit the grille into its recess so that it
is barely in place. Starting with one corner,
go around the speaker, pushing the grille in
a little bit each time. You should be gentle,
the aluminum grille can be easily bent out
of shape. The speaker will have an absolute-
ly flush appearance when it is properly
installed.
Figure 19
Figure 20