Filter
Top Products
22
Specifications
Specifications
Model AT8
Driver Compliment
8” Carbon/Glass Fiber Woofer with
Dispersion Stabilizer, Custom Debris
Screen, High BL Magnet Structure with
Vented Pole Piece
1” Teteron Tweeter Housed in a Low
Diffraction Precision Adjustment
Mechanism
Design Principle
Infinite baffle for large and varying air
volumes
Recommended Amplifier Power
Ten to One Hundred Fifty Watts per
Channel
Nominal Impedance
6 Ohms
Frequency Response
40 Hz to 21,000 Hz, plus or minus 3dB
(on axis)
Dispersion Pattern
90 degrees Horizontally or Vertically
(plus or minus 5dB)
Sensitivity
90 decibels for 2.83 volts of Pink Noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
10-3/16” x 14-1/4”
Depth Behind Wall
3-1/8” Deep (assumes 1/2” drywall)
Wall Cut-Out Dimensions
9-1/8” x 13-1/8”
Wiring Requirements
We recommend 16 to 18 gauge stranded
wire for up to 80 feet, 14 gauge stranded
wire for up to two hundred feet.
Connectors accommodate 12 to 18 gauge
stranded wire.