Filter
Top Products
MAKING A PHONE CALL
Dialing with the cell phone
With the NXBT-001 on and paired with your cell phone, dial your cell phone as
you would normally.
Voice Dialing
With the NXBT-001 on and paired with your cell phone, press the button
once. After you hear the audio signal, state the desired name.
Note: Your cell phone must support Voice Dialing.
Last Call Redialing
With the NXBT-001 on and paired with your cell phone, press and hold the
button for 2 seconds, the last dialed number will be redialed.
Note: Do not press the button for more than 2 seconds as the NXBT-001
will turn off.
ANSWERING A PHONE CALL
Press the button once when the cell phone rings.
ENDING A PHONE CALL
Press the button once when the conversation has ended.
REJECTING A PHONE CALL
Press and hold the button for 2 seconds to reject an incoming call.
TRANSFER CALL BETWEEN YOUR CELL PHONE AND THE NXBT-001
Press and hold the button for 2 seconds during your conversation. You will
hear a BEEP sound and the call will transfer between your cell phone and the
NXBT-001.
HAND-HOLD MODE
This device supports hand-hold mode. If you don't want to use the loudspeaker,
you can turn the volume to the lowest level and use the NXBT-001 as you using
your cell phone.
VOLUME CONTROL
With the NXBT-001 on and paired with your cell phone, press or to
adjust the volume.
OPTIONS AVAILABLE DURING A CALL