Filter
Top Products
24 VHF 7000, 7100US, 7100EU Operation Manual
NAVMAN
1. Select DSC SETUP, then ATIS MMSID.
2. If this is the rst time that you are entering your ATIS MMSID, a dashed line appears. Enter
your ATIS MMSID along the dashed line. The rst number is always 9. Press ENT to conrm
each correct entry and to move to the next digit.
If you make an error, press - until < appears, then press ENT to backup and correct the
entry.
If you are editing an existing ATIS MMSID, this will be displayed. Make the required
changes.
3. Press ENT to store your user MMSID.
4. Enter your ATIS MMSID again as a password check, then press ENT to permanently store
the ATIS MMSID and return to the menu.
You can view your stored ATIS MMSID at anytime by selecting ATIS MMSID in the main
menu.
4-5-2 Enable ATIS Functionality (ATIS FUNC)
VHF 7100EU only. ATIS functionality will operate only after the ATIS MMSID has been entered
(see previous section).
ad
1. Select DSC SETUP, then ATIS FUNC.
2. Select ON (on) to enable the ATIS functionality and automatically disable DSC functionality.
The ATIS annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you
enable one, the other will turn OFF (off). If DSC and ATIS are both OFF (off), DSC will have
to be switched ON (on) for normal DSC operation.
There are two annunciators in the screen to show you the current mode: if the DSC annunciator is shown,
DSC is operational, if the ATIS annunciator is shown, ATIS is operational.
4-6 DSC functionality options (DSC FUNC)
DSC functionality can be disabled but this is not recommended.
1. Select DSC SETUP, then DSC FUNC.
2. Press ENT to select ON and to operate the DSC functionality. This will automatically disable ATIS
functionality. The DSC annunciator appears on the screen.
It is not possible to have both ATIS ON (on) and DSC ON (on) simultaneously. When you enable one, the
other will turn OFF (off). If DSC and ATIS are both OFF (off), DSC will have to be switched ON (on) for
normal DSC operation.
ATIS FUNC
>ON
OFF
DSC SETUP
INDIV REPLY
ATIS MMSID
>ATIS FUNC
DSC SETUP
GROUP SETUP
INDIV REPLY
>DSC FUNC
DSC FUNC
>ON
OFF
ATIS