Filter
Top Products
21VHF 7000, 7100US, 7100EU Operation Manual
NAVMAN
Section 4 - DSC Setup Menu (DSC SETUP)
These DSC facilities are available only on the 7100US and 7100EU and a
valid user MMSID must be entered to access the DSC functions.
4-1 DSC Setup - Menu Options
The following options are available:
Sections 1.3 and 1.4 explain how to navigate around the menu and enter, save and
change data.
4-2 Enter Your USER MMSID (USER MMSID)
This is a once-only operation. You must enter your user MMSID before you can access the
DSC functions.
You can display and read your user MMSID at any time, but you get only one opportunity to enter
your user MMSID.
1. Select DSC SETUP, then USER MMSID.
2. If this is the rst time that you are entering your user MMSID, a dashed line appears.
Enter your user MMSID along the dashed line. Press ENT to conrm each correct
entry and to move to the next digit.
Enter your user MMSID. See section 4.2. (If you do not have a
user MMSID, see Appendix D.)
USER MMSID
GROUP SETUP
INDIV REPLY
ATIS MMSID
ATIS FUNC
DSC FUNC
LL REPLY
Enter or change the name and/or details of a group.
See section 4.3.
Enter or change your ATIS MMSID (VHF 7100EU only).
See section 4.5.
Enable/disable the ATIS function (VHF 7100EU only).
See section 4.5.
Select the type of response to an LL polling request.
See section 4.7.
Turn the DSC operation ON/OFF (on/off).
See section 4.6.
Choose an automatic or manual response to calls (VHF 7100US
only). See section 4.4.
DSC SETUP
>USER MMSID
GROUP SETUP
INDIV REPLY
USER MMSID
INPUT AGAIN
–––––––––
INPUT USER
MMSID
–––––––––
187654321
MMSID
>STORE
CANCEL