Filter
Top Products
SPECIFICATIONS
10
EQUALIZER:
Equalizer Control Bands
2X15, 2/3 Octave ISO Spacing From 25Hz to 16KHz
Filter Type
Constant Q
Slider Travel
20mm (Center Detent)
Level Control Range
+/-6dB or +/-12dB (Selectable)
INPUTS:
Type
Active Balanced/Unbalanced
Connectors
3-Pin XLR, 1/4” TRS (Balanced), RCA (Unbalanced)
Impedance
20K Ohms Balanced; 15K Ohms Unbalanced
Maximum Level
+/-18dBV
OUTPUTS:
Type
Active Balanced/Unbalanced
Connectors
3-Pin XLR, 1/4” TRS (Balanced).
Impedance
Typically < 600 Ohms
Maximum Level
+/-16dBV
Clip LED Threshold
5dB (Below Clipping)
Low Cut Filter
40Hz, 12dB/octave
Frequency Response
20Hz - 20KHz, +/- 1dB
THD + Noise
<0.002% (@ 1KHz, all faders at mid position)
Signal to Noise Ratio
93dB (@ 1KHz)
Channel Separation
60dB (1KHz)
Line Voltage
100-130V AC, 50/60Hz
200-240V AC, 50Hz
Power Consumption
Maximum: 15 watts
SIZE:
19”W X 1.75”H X 8.66”D (1U)
(48.2cm X 4.4cm X 12.7cm)
WEIGHT:
6.16lbs. (2.8Kg.)
The specications above are correct at the time of printing of this
manual. For improvement purposes, all specications for this unit,
including design and appearance, are subject to change without
prior notice.