Musical Fidelity M3CD CD Player User Manual


 
SPECIFICATIONS
M3 CD manual issue 1 Page 16 of 17
Output
Output impedance 50 ohms
Output, digital 0dB level RCA output - 2.2V r.m.s. nominal
DAC
DAC circuit 24 bit Delta-Sigma (bit stream) dual differential 8x over-sampling
Total correlated jitter <135 picoseconds peak to peak
Linearity <0.1dB down to -96dB
Frequency response 10Hz to 20 kHz -0.2dB max.
Channel separation >105dB 20 Hz to 20 kHz
Signal-to-noise ratio >117dB “a”- wtd.
Total harmonic distortion <0.003% 10Hz to 20 kHz
Connections
Line level outputs 1 pair line level RCA connectors, left and right outputs
Digital outputs 1 RCA coaxial connector SPDIF
1 TOSLINK optical connector
Power requirement
Mains voltages 115/230VAC 50/60Hz (factory pre-set)
100VAC 50/60Hz (alternative)
Consumption 20 Watts maximum
Weight
Unit only, unboxed 6.65 kg (14 lbs)
In shipping carton 10.5 kg (23 lbs)
Dimensions
Wide 440 mm (17”)
High, including feet 100 mm (4”)
Deep (front to back) including terminals 375 mm (14¾”)
Standard accessories
IEC type mains lead (10-Amp type)
M3 remote control
Batteries, LR03 or AAA, manganese alkaline type - 2 off
Musical Fidelity reserves the right to make improvements which may result in
specification or feature changes without notice.