Filter
Top Products
A1 Integrated
AMPLIFIER OPERATION
Issue 2: 05
th
March 2008
Page 9 of 13
A1 V0.0
MUTE
CD
™™™™ 33
CD
MUTE 33
USB
™™™™
33
PHONO
™™™™
33
CD
™™™™
33
TUNER
™™™™
33
AUX
™™™™
33
HT
™™™™
33
STARTING
Once all connections are made, switch on the unit, using
the POWER button front of the unit. The backlit
display will light. The display will indicate the product
name will show but speaker outputs are muted, for about
fifteen seconds, so no sound will be heard from the
speakers.
Once the 15 seconds is up the volume and selected
source input will indicate unit is settled, and ready for
use.
VOLUME
The volume should be adjusted for normal listening
levels. This is done by pressing the volume up/down
buttons on the front panel. The volume level is readily
identifiable on the display bargraph and numeric
indicator, in the above example it is set to 33% of the
full range.
Adjusting the volume can also be achieved using the
remote handset, using the volume up/down buttons (see
p. 9).
MUTE (remote only)
The sound from the speakers may be muted by use of
the MUTE button on the remote. Press once, and
MUTE will show in the display indicating muted state.
No sound will be heard from the speakers.
To return to listening; simply press the MUTE button
again so MUTE is no longer displayed.
USB
To use the USB input, connect computer USB output to
the USB socket (see p.7). Select USB input using the
source up/down buttons until USB is shown in the
display.
Selecting the USB input can also be achieved using the
corresponding button on the remote handset, (see p. 8).
PHONO
To use the phono (MM) input, connect turntable
cartridge outputs to the phono input RCA sockets (see
p.7). Select PHONO input using the source up/down
buttons until PHONO is shown in the display.
Selecting the PHONO input can also be achieved using
the corresponding button on the remote handset, (see p.
8).
CD
To use the CD input, connect CD player outputs to the
CD input RCA sockets (see p.7). Select CD input using
the source up/down buttons until CD is shown in the
display.
Selecting the CD input can also be achieved using the
corresponding button on the remote handset, (see p. 8).
TUNER
To use the tuner input, connect tuner outputs to the tuner
input RCA sockets (see p.7). Select TUNER input using
the source up/down buttons until TUNER is shown in
the display.
Selecting the TUNER input can also be achieved using
the corresponding button on the remote handset, (see p.
8).
AUX/HT
To use the AUX, as standard input, check the AUX/HT
switch (back panel) is set to AUX position. The display
will then refer to this input as AUX.
Connect line outs from source to the AUX input (see
p.7). Select AUX input using the source up/down buttons
until AUX is shown in the display.
To use the AUX, as Home Theatre direct input, move
the AUX/HT switch to the HT position.
The display will then refer to the input as HT. Connect