Filter
Top Products
Page 3
Tools Required
Phillips Screwdriver, Wire Cutters/Strippers, Drywall Saw and
Measuring Tape
Installation Instructions
Determine speaker location and mark your plans for future
reference.
NEW CONSTRUCTION
STEP 1 After determining the location of the speaker, attach
the mounting flanges to the mounting ring as shown in
Figure 1. Position the mounting ring-flange assembly to
the wall stud as shown. Attach the mounting ring-flange
assembly to the studs using drywall screws or nails.
Once the mounting ring is secured to the wall, the
edges of the mounting bracket will extend from the
studs by approximately 3/8”. This will allow for drywall
construction later.
wall stud
mounting flanges
mounting ring
screws
drywall screws
Figure 1– SAMB Mounting
Bracket For New Construction
115958 B
IMAGE 3 OF 8