Filter
Top Products
Fiber Driver
®
EM316EDFA User Guide
P/N 1294008-001 Rev D2 31
5.2.6.4 “port description”
As with a module at the slot level, a descriptive name may be applied to each port. An
example of the description command at the port level is shown below.
fiberdriver(port/1.3.1)# description EDF
A
-
port1
fiberdriver(port/1.3.1)# show
Port: 1.3.1
Name: EDFA-port1
Enable: enable
Link: no Signal
Connector: fo SC Medium: single Mode
TxPower(dBm): -15.26
DDiags: Alarm Temp(C): 23 Supply(V): 3.28
Alarm Cause: TX Loss of Signal Alarm (tx -15.26dBm)
Gain desired(dB): 25
Gain(dB): 24.76
fiberdriver(port/1.3.1)#