Filter
Top Products
Fiber Driver
®
EM316EDFA User Guide
P/N 1294008-001 Rev D2 23
5.2.5.3 “show”
The show command displays management and system information related to the
EM316LNXNM-OT management module, the hosting chassis, other modules in the chassis,
and ports available within the managed system. The arguments (parameters) following the
show command and the operational context displayed by the system prompt control the
many functions available through this command.
The next box displays the CLI help for the show command in the slot-level context of the
EDFA modules. The first command (shown in bold) is “show?” and the second command
(also in bold) is “show ?”. The subtle difference between the two commands is the space
separating the command from the “?” in the second command.
The box below illustrates the show command applied with no arguments in the slot-level
context of a EDFA module. Notice the difference between the two slot displays.
fiberdriver(slot/1.4)#
s
how?
show Show basic info
fiberdriver(slot/1.4)# show ?
<cr> Show basic info
config Show administrative configuration for this object
defaults Show default configuration for this object
digital-diagnostics Show Digital Diagnostics summary
redundancy Show slot redundancy info
running-config Current operating configuration
statistics Show port info
fiberdriver(slot/1.4)# show
fiberdriver(slot/1.4)#
s
h
ow
Slot: 1.4
Model: EM316EDFA
Name: EM316EDFA at 1.4
Hardware Revision: 1
Sw Configurable: yes Operation Type: Inline AGC
Number Of Ports: 0
fiberdriver(slot/1.4)# slot 1.3
fiberdriver(slot/1.3)# show
Slot: 1.3
Model: EM316EDFAv
Name: EM316EDFAv at 1.3
Hardware Revision: 1, FPGA 0x6a
Sw Configurable: yes Operation Type: Inline AGC
Number Of Ports: 2
Port Enable Link DDiags Gain(dB) Gain desired(dB) Name
===== ====== ========= ====== ======== ================ ==============
1.3.1 enable no Signal Alarm 25.25 25 FO_SC at 1.3.1
1.3.2 enable no Signal Alarm N/A N/A FO_SC at 1.3.2
fiberdriver(slot/1.3)#