Morphy Richards 29118 REV2 Stereo System User Manual


 
UUKK HHeellpplliinnee 00887700 006600 22661144 IIrreellaanndd HHeellpplliinnee 11880000 440099111199
77
STANDBY
11
Press the power button on the
woofer cabinet, unit is in
standby mode.
22
Press STANDBY button on the
CD unit (or remote) to switch the
unit on.
33
Select the sound source (CD,
AUX, CARD-USB or TUNER) by
pressing FUNCTION button.
The corresponding display will
light up.
44
Adjust the VOLUME with the
volume (UP or DOWN) button
55
Set the preset equaliser (PASS,
CLASSIC, ROCK, POP, OR
JAZZ) with the EQ button on the
remote.
66
Press STANDBY button again on
the CD to turn off the unit.
CLOCK SETTING
In the standby mode.
11
Press and hold MEMORY/CLK-
ADJ. button until the time
displays 24-hour digit flashing.
22
Press SEARCH/SKIP/TUNING
(DOWN or UP) button to adjust
12 hour or 24 hour digit.
33
Press MEMORY/CLK-ADJ.
button again, the time display
HOUR digit flashes, press
SEARCH/SKIP/TUNING (DOWN
or UP) button to adjust HOUR
digit; Press MEMORY/CLK-ADJ
button once more, the MINUTE
digit flashes, adjust it by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
44
Press the MEMORY/CLK-ADJ
button again to confirm the
time.
55
Each enable state as shown
above will be cleared if the key
is not pushed in 10 seconds.
66
In the CD or TUNER mode.
Press and hold the
MEMORY/CLK-ADJ button a
few seconds. To check the
current time.
TIMER SETTING
(on the remote)
11
After adjusting clock, press the
TIMER button for a few
seconds, ‘ON and 00:00’
appears on the display and the
HOUR digit flashes. D.
22
Press the
SEARCH/SKIP/TUNING (UP or
DOWN) button to adjust it.
33
Press the TIMER button again,
the MINUTE digit will start
flashing, adjust it by pressing
SEARCH/SKIP/TUNING (UP or
DOWN) button.
44
Press the TIMER button once
more to confirm/order TIMER
ON time.
55
After adjusting ‘TIMER ON’, ‘
OFF’ appears on the display and
the HOUR digit flashes. E
66
Repeat the above steps 2 to 3,
then press the TIMER button
once more to confirm/order
TIMER OFF time.
77
Now the TUNER or CD appears
on the display with flashing,
adjust ‘TUNING’ or ‘CD’ by
pressing the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
88
Press the TIMER button again,
the timer ‘VOL 15’ indicator
appears on the display and
flashes, adjust the timer volume
high or low by the
SEARCH/SKIP/TUNING (UP or
DOWN) button.
99
Each enable state as shown
above will be cleared if the
button is not pushed in 10
seconds.
1100
After adjusting ‘TIMER ON” and
‘TIMER OFF’, press the TIMER
button. ‘ ‘ appears on the
display.
1111
The unit will be switched on
automatically at ‘TIMER ON’ and
start playing and the unit will be
switched off automatically at
‘TIMER OFF’.
Note: N.B Not available with
USB or SD.
D
E
29118 rev2 8/8/06 13:05 Page 8