Filter
Top Products
7
© Monitor Audio 2005 Rev 2
Positioning
The Radius 250 can be positioned vertically (portrait) or horizontally (landscape)
and has been designed ideally to be used with a large plasma TV or in places
where space is at a premium. The Radius 250 can be positioned on our bespoke
table stand, or shelf by fitting the rubber feet provided to the underside of the
speaker. Alternatively you can choose to fix the Radius 250 to a wall by using the
high-quality bespoke wall bracket provided. Please refer to the ‘Radius 225/250
Wall Bracket Fixing Instructions’on page 8.
Configuration
The Radius 250 is fully magnetically shielded and can be positioned as close to a
TV as you wish, either as a pair in a two-channel stereo system or as part of a
multi-channel audio/ Home Theatre system. The Radius 360 or 720 subwoofers
can be used with the Radius 250 to provide deep, powerful bass. Please refer to
the section; ‘System wiring configurations’ on page 14.
Grille Fitment
To help the Radius 250 fit into any life-style environment we include a choice of
silver and black grilles (silver and white with white Radius 250) as standard. You
will find the spare grille enclosed within the polystyrene packaging trays. We have
also included a spare badge. This is for when the Radius 250 is used as a centre
channel speaker. If you don’t like the factory fitted location of the badge, you can
carefully remove this badge and place the enclosed spare badge in your preferred
location.
If you wish to change the grille colour, you can do this by carefully removing the
grille using your fingers to gradually ease the existing grille off the cabinet. To fit a
grille, gently press the grille into place
Technical Specification
Frequency
Response
Nominal
Impedance
Sensitivity
(1w@1m)
Maximum
SPL
Power
Handling
Full
Range
(R.M.S)
Recommended
Amplifier
Requirements
50 Hz –
25 KHz
8Ω 90dB 108dBA 120W 20-120 W
Bass
Alignment
Drive U
nit
Complement Bass
Drive Unit
Complement
Tweeter
External
Dimensions
(cm)
Weight
Kg
(each)
Twin, Front
ported bass
reflex
2 x 4” MMP 2 (Second
generation metal matrix
polymer)
1 x 25mm C-
CAM gold
dome
tweeter
76 H x 12 W
x 10.5 D
4.3