Filter
Top Products
3
© Monitor Audio 2005 Rev 2
Positioning
The Radius 90 can be positioned on a shelf by fitting the rubber feet provided to
the underside of the speaker to stop vibrations. Alternatively, you can choose to fix
the Radius 90 to a wall by using the high-quality metal alloy wall bracket provided,
or by purchasing the specially designed bespoke Radius Floor Stand from your
local authorised Monitor Audio dealer. To fix your speaker to the wall, please refer
to the ‘Wall Bracket Fixing Instructions’ in the wall bracket carton. When using the
wall bracket, we do not recommend connecting the loudspeaker using 4mm plugs
into the ends of the terminals. Instead the connection can be made by unscrewing
the terminal cap and using the through hole. The terminal cap can be retightened
to provide a secure connection.
Configuration
The Radius 90 is extremely versatile and can be used in a number of system
configurations. It is fully magnetically shielded and can be positioned as close to a
TV as you wish. On it’s own it can be used in a two-channel stereo system for use
in a small room, or to provide background music in a kitchen or bedroom.
Alternatively the Radius 90 can be used as part of a Home Theatre system or
multi-channel audio set-up. The Radius 360 or 720 subwoofers can be used with
the Radius 90 to provide deep, powerful bass. Please refer to the section; ‘System
Wiring Configurations’ on page 14.
Grille Fitment
To help the Radius 90 fit into any life-style environment we include a choice of
silver and black grilles (silver and white with white Radius 90) as standard. You will
find the spare grilles enclosed within the polystyrene packaging end caps.
If you wish to change the grille colour, you can do this by carefully removing the
grille, using your fingers to gradually pull the existing grille off the cabinet. To fit a
grille, ensure the badge is correctly orientated and gently press the grille into place.
Technical Specification
Frequency
Response
Nominal
Impedance
Sensitivity
(1w@1m)
Maximum
SPL
Power
Handling Full
Range
(R.M.S)
System
Power
Handling
(R.M.S)
Recommended
Amplifier
Requirements
85 Hz –
25 KHz
8Ω 87dB 105dBA 60W 100W 10-100 W
Bass
Alignment
Drive Unit
Complement Bass
Drive unit
Complement
Tweeter
External
Dimensions
(cm)
Weight Kg
(each)
Rear
ported
bass reflex
1 x 4” MMP 2 (Second
generation metal matrix
polymer)
1 x 25mm C-
CAM gold
dome tweeter
19 H x 12 W
x 14 D
2