MK Sound SW-95 Speaker User Manual


 
4
FRAMELESS IN-WALL SPEAKER
2. INSTALLATION INTO EXISTING WALLS
3. SPEAKER WIRING
The Positive (+) lead from your amplifier or receiver should be connected to one of the RED (+) INPUT terminal, and the Negative
(-) lead from your amplifier or receiver should be connected to one BLACK (-) INPUT terminal.
4. SPEAKER WIRING FOR SW-85 AND SW-95 SPEAKERS ONLY
VARIATIONS OF SOUND (SW-85 and SW-95 only)
Your M&K SW-85 & SW-95 speakers reproduce sound with exceptional transient accuracy and a very wide dynamic range. They
will give you outstanding results with any high quality amplifier or receiver.
! !
IMPORTANT! - MAKE SURE WALL ELECTRICITY IS
TURNED OFF BEFORE STARTING INSTALLATION
1. ALL MODELS: Mark wall with template,
using a stud finder to maintain a 2" distance
from any stud. Make sure that you are clear
of any crossbraces in the
wall structure.
4. SW-95, SW-50, SW-51 ONLY:
Tape the speaker wire to
the back wall so the
end is within the
opening as shown.
5. Fold the first section of the foam strip and
insert the corner through the wall opening.
6. SW-95, SW-50, SW-51 ONLY:
Continue folding and inserting the rest of
the foam strip into the wall opening until
the foam frame is created.
2. ALL MODELS: Cut opening precisely
with drywall saw, drywall router, etc.
Sand edges and clean debris from
installation area.
3. SW-95, SW-50, SW-51 ONLY:
Your speaker installation kit includes a foam
strip to fill in the wall space around the back
of your speaker. The foam strip has 1"deep
slits to allow bending it into a 4-sided frame.
NOTE: Be careful when bending and handling the
strip so that you do not rip it.
8. ALL MODELS: Mount the adhesive
backed foam pad in the wall approximately
five inches above the bottom of the cutout.
This puts the foam behind the woofer.
speaker
wire
NOTE: Do not put any other acoustic filler
within the wall opening as it can interfere
with speaker mounting.
7. Make sure that the frame is centered
within the opening
FOR STANDARD INSTALLATION
DRYWALL THICKNESS CANNOT
EXCEED 1.25 INCHES.
FOR THICKER WALLS CALL
M&K SOUND.
+
+
AMPLIFIER OR RECEIVER
LEFT RIGHT