MK Sound SW-95 Speaker User Manual


 
3
FRAMELESS IN-WALL SPEAKER
1. INTRODUCTION
Congratulations! Your new M&K in-wall speaker system will give you years of unmatched enjoyment and excitement while
listening to your favorite musical and audio/video sources. We encourage you to read this owner’s manual, as there is a great
deal of information provided here to help you achieve the best possible performance.
If you have any questions about your in-wall speaker system, please contact your M&K dealer or call the M&K factory
directly at (818) 701-7010, from 8:30 AM to 5:00 PM Pacific Time, Monday through Friday. We will be happy to help you with any
question. Additional information may also be obtained on our web site: www.mksound.com
or you may send us an e-mail to
suppor
t@mksound.com.
If you are installing your new speaker into existing walls, please see section 2, on page 4.
If you are installing your speakers into walls that are being constructed, go to section 12, page 10 or the Pre-Construction
Bracket Instructions that are included with your Pre-Construction Bracket Kit SPRE50, SPRE85, or SPRE95.
All M&K In-wall speakers is well suited for either wall mount or ceiling mount applications. Although, the SW-50, with its
circular grille, is the aesthetically preferred speaker for ceiling mount locations.
Speaker Grille
Inwall Speaker Assembly
Pre-Construction Assembly*
(Sold separately)
THESE ARE THE MAJOR COMPONENTS OF YOUR NEW SPEAKER SYSTEM
*not required; available from your dealer as part number SPRE85 (for use with SW-85, SW-52);
SPRE95 (for use with SW-95, SW-62); or SPRE50 (for use with SW-50, SW-51, SW-54).
Foam Dampening Pad
(Installed inside wall)
Foam Frame
(Installed inside
wall)