Mission MS-8 Speaker User Manual


 
Positioning your Subwoofer
There should be a mains outlet within easy reach.
Although the unit may be placed almost anywhere in the room, even behind
the sofa or the TV set, we recommend that it be placed in front of the listener
and as central to the listening position as possible. The subwoofer should not
be operated within 450mm of a television set as the drive unit magnet may
distort the picture.
We suggest you position the subwoofer about 20cm (8 inches) from the wall.
A position close to the wall will enhance the bass; placing it across a room
corner will increase the bass further, possibly at the expense of clarity.
Experiment with a variety of locations and sources before making a final
decision.
The drive unit and bass ports move a lot of air at high volume, so make sure
you do not place your subwoofer near surfaces or objects that may rattle.
Your system will perform best if there is a clear line of sight between the
subwoofer and the listening position.
NOTE: When running signal cables to the subwoofer, keep them clear of obstructions. Do not run a long signal cable close to mains
cables or cables carrying heavy digital traffic.
>200mm
>200mm
8
A/V Processor Connections
Stereo Line Output Connections
Pre Out - Main In Connections
Speaker Level Connections
Your subwoofer has been designed for optimum performance
with a Digital processor. If your AV processor has a line level or
LFE subwoofer output you should use this connection. You will
need to purchase a single screened RCA phono lead from your
dealer. Connect this lead to the Left line input of the Subwoofer
as shown opposite.
Alternatively, you may use a split mono lead from the processor
to both inputs of the subwoofer. In this case the input level at the
subwoofer will be slightly higher.
If your amplifier has a spare preamplifier output or a stereo sub-
woofer output, connect the sub-woofer as shown. You will need
a stereo screened RCA phono cable.
If you use a stereo pre and power amplifier, or a stereo amplifier
where the pre and main amplifier can be separated, connect
the sub-woofer as shown. You will need two screened RCA ‘Y’
adaptors and two single RCA phono cables.
Remove the Pre-Main links on your amplifier. Connect the RCA
‘Y’ adaptors and cables as shown. Connect one leg of the ‘Y’
adaptor to the Left Channel Pre Out socket on the amplifier and
the other leg to the Left Channel Main In socket. Connect the
remaining plug on this combination to the Left Channel Line
Level Input on the sub-woofer. Repeat this for the Right Channel.
The high level Speaker connections should be used only if your
amplifier does not have a line level subwoofer output. In this
connection the subwoofer is fed together with the Front
loudspeakers. For this you will need two extra twin core cables.
Measure out two loudspeaker cables
of the appropriate length.
Prepare the cables as shown.
Connect the Left Speaker Terminals on the subwoofer to the
Front Left speaker terminals on the amplifier. Connect the Red (+)
speaker terminal on the amplifier to the Red (+) terminal on the
subwoofer. Connect the Black (-) speaker terminal on the
amplifier to the Black (-) terminal on the subwoofer. Now
connect the Right Speaker terminals on the subwoofer to the
Front Right speaker terminals of the amplifier.
INPUT
OUTPUT
LEFT
RIGHT
CENTRE FRONTREAR
LEFTLEFT RIGHTRIGHT
Subwoofer Out (Line Level)
AV AMPLIFIER
INPUT
OUTPUT
LEFT
RIGHT
CENTRE FRONTREAR
LEFTLEFT RIGHTRIGHT
LEFTRIGHT
AMPLIFIER
L
R
PRE
OUT
MAIN
IN
(x2)
CENTRE FRONTREAR
LEFTLEFT RIGHTRIGHT
L
R
AV AMPLIFIER
Stereo Outputs (Line Level)
9
R
L
SPEAKER LEVEL INPUTS
LEFT
SUBWOOFER
RIGHT
AMPLIFIER
TO FRONT
SPEAKERS
Connecting the MS-8 MS-CUBE MS-DUO, and
The MS-8 MS-CUBE MS-DUO, and feature identical connectivity and are connected to the rest of your system in exactly
the same way.