Filter
Top Products
owners manual
2
IMPORTANT SAFETY
INSTRUCTIONS -
READ CAREFULLY !
Caution:To prevent the risk of electrical shock, match wide blades of plug to
wide slot, fully insert. Caution:The unit is still connected to the mains even if
switched off.
Read Instructions: All safety and operating instructions should be read before
the product is operated.
Retain instructions: Safety and operating instructions should be retained for
future reference.
Heed Warnings: All warnings on the product & operation instructions should
be adhered to.
Follow Instructions: All operating and use instructions should be followed.
Cleaning: Unplug the product from the wall before cleaning. Do not use
aerosol or liquid cleaners, just a damp cloth.
Attachments: Do not use attachments not recommended by the product
manufacturer as they may cause hazards.
Water and moisture: Do not use this product near water.Do not expose
this apparatus to dripping or splashing and ensure that no objects filled with
liquids are placed on the apparatus.
Ventilation: Openings in the cabinet are provided for ventilation and to
ensure reliable operation and protect it from overheating so they must not be
blocked or covered by placing the product on a bed, sofa or other similar
surface.This product should not be placed in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the manufacturer's
instructions have been adhered to.
Power Sources:This product should be operated only from the type of
power source indicated on the marking label. If you are not sure of the type
of power supply in your home, call your local power company.
Grounding or Polarization:This product may be equipped with a polarized
alternating current line plug.This plug will fit the power outlet in only one way
as a safety feature. If you are unable to insert the plug, try reversing it.
If the plug should still fail to fit, contact your electrician to replace your outlet.
Do not defeat the safety purpose of the plug.
Power Cord Protection: Power supply cords should be routed so that they
are not likely to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience receptacles
and the point where they exit from the product.
Overloading: Do not overload wall outlets or extension cords, as this can
result in a risk of electrical shock.
Object and Liquid Entry: Never push objects of any kind into this product
through openings as they may touch dangerous voltage points or short out
parts that can result in a fire or electrical shock. Never spill liquid of any kind
on the product.
Servicing: Do not attempt to service this product yourself as openings or
removing covers may expose you to dangerous voltage or other hazards.
Refer all servicing to qualified personnel.
Heat:This product should be situated away from heat sources such as
radiators, heat registers, stoves, or other appliances (including amplifiers) that
produce heat.
Non-Use Periods:The power cord of the product should be unplugged from
the outlet when left unused for a long period of time.
Damage Requiring Service:The product should be serviced by qualified
personnel when:
A. The power supply cord or the plug has been damaged; or
B. Objects have fallen, or liquid has been spilled into the appliance; or
C. The product has been exposed to rain; or
D. The appliance does not appear to operate normally or exhibits a
marked change in performance; or
E. Product has been dropped, or the enclosure damaged.
F. If the product does not operate normally by following the
operating instructions.
NOTE:This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However,there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment on
and off, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Please take the time to read all of the instructions contained in this manual to
make certain your system is properly installed and functioning correctly.
Please retain the carton and packing materials for this MIRAGE product to
protect it in the event it ever has to be shipped to a service center for
repairs. Product received damaged by a service center that has been shipped
by an end user in anything other than the original packaging will be repaired,
refurbished, and properly packaged for return shipment at the end
user’s expense.
MIRAGE
®
is a registered trademark of Audio Products International Corp. “Dolby”, “Dolby Pro-Logic”
and “Dolby Digital Surround” are trademarks of Dolby Laboratories Licensing. DTS is a Trademark
of Digital Theater Systems Inc.
The lightning flash with arrowhead symbol. Within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “dangerous voltage” within the
products enclosure that may be of sufficient magnitude to
constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended
to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature
accompanying the appliance.