MidiLand 750 Speaker System User Manual


 
- 11 -
Plug in the power cord to the AC power outlet.
Turn on the main power switch located on the back of the subwoofer. When the
Power indicator on the front panel turns to red, the system is on the
STANDBY mode. Press the POWER button located on the front panel of the
subwoofer or the STANDBY button located on the remote control to turn on the
system. The Power indicator is in blue color when the system is on.
2. INPUT SELECT
Press the buttons (DVD/5.1, STEREO, AUX1, AUX2) located on the remote control
to select audio source. The selected audio source will be shown on the LED display.
Note: For the best sound quality, it is recommended to select 2-channel input
STEREO if your audio source is CD, MP3 or VCD.
3. OUTPUT SELECT
Press the buttons (2.1CH or 5.1CH) for the music preference.
4. VOLUME AND FINE TUNING
The main volume can be adjusted by the MASTER VOL. located the remote control.
Press - and + of CEN., SUR. and SW to adjust volume level for Center Speaker,
Surround Speakers and Subwoofer.
5. MUTE
Press the MUTE button on the remote control, the system goes into mute mode with
the MUTE indicator shown on the LED display. Press the MUTE button again to
disable the mute mode.
6. RESET
Press the RESET button on the remote control, the system will be reset to factory s
default setting.
7. BALANCE:
Press the L and R buttons on the remote control to adjust the balance level between
the left and right channel.
1.ON/OFF
OPERATING INSTRUCTIONS