Filter
Top Products
CHAPTER 5: MOUNTING
22
Floor Mounting Acherons and Acheron LFs
To floor mount an Acheron or Acheron LF:
1. Remove the two 3/8-16 x 1.5-inch screws at the bottom
of each loudspeaker side (four total).
2. Secure the left bracket to the left side of the loudspeaker
with two of the removed screws and two of the included
flat washers.
■ To mount the loudspeaker at 0 degrees with no downtilt
or uptilt, use the bottom bracket holes.
■ To mount the loudspeaker with downtilt, orient the
bracket with the large end toward the rear of the loud-
speaker. For available downtilt angles, see “Floor Mount
Downtilt Angles” on page 23.
■ To mount the loudspeaker with uptilt, orient the bracket
with the large end toward the front of the loudspeaker.
For available uptilt angles, see “Floor Mount Uptilt
Angles” on page 23.
3. Repeat the previous step with the right bracket and the
remaining two screws and washers.
4. Secure the brackets to the floor with fasteners (not
included) appropriate for the floor surface.
Floor Mounting Acherons with Downtilt and
Uptilt
The Acheron floor mount brackets can mount loudspeakers
with downtilt or uptilt. Available angles are 3-18 degrees in
3-degree increments. The direction in which the brackets are
oriented determines whether the loudspeaker can be
mounted with downtilt or uptilt.
CAUTION: When using the floor mount brack-
ets with an Acheron LF that will also have an
Acheron stacked on top of it, mount the Acheron LF
at 0 degrees using the bottom bracket holes.
Acheron Floor Mounted with 3-Degree Downtilt
Front
–3°
!