Filter
Top Products
30
Sound settings
The menu „SOUND“ permits you to adjust all sound functions and
to store these settings.The stored settings can subsequently been
recalled by pressing the PP key.
•Press the RED key to open the menu „SOUND“.
•Select the desired function by pressing the P̅/P̃ keys.
•Adjust the selected value by pressing the ୵ /
୴
keys.
EFFECT = or mono programmes, switching this function „ON“
provides an effect similar to a stereo programme.
For stereo programmes, a fuller sound is provided.
•Select „STORE“ by pressing the P̃ key and confirm the operati-
on by pressing the
୴
key.
•Close the menu by pressing the key.
TV
The menu „H.PHONE“ permits you to adjust all headphone sound
functions and to store these settings.The stored settings can subse-
quently been recalled by pressing the PP key.
•Press the RED key to open the menu „SOUND“.
•Select the function „HEADPHONE“ by pressing the P̅/P̃ keys..
•Open the menu by pressing the ୵ /
୴
keys.
•Select the function to be adjusted by pressing the P̅/P̃ keys
•Adjust the value by pressing the ୵ /
୴
keys.
•
Select „STORE“ by pressing the P̃ key and confirm the operation
by pressing the ୴ key.
•Close the menu by pressing the key.
TV
SOUND
VOLUME
BASS
TREBLE
BALANCE
EFFECT
HEADPHONE
STORE
Headphone settings
H.PHONE
VOLUME
MODE
STORE
Station search
3. Direct channel input for terrestrial stations
For direct channel input, you must know the band (C = standard
channel / S = special channel) and the channel number.
•Press the BLUE key to select the menu „INSTALL.“.
•Select „TUNING“ with the keys P̅/P̃.
•Press the key ୴ to open the menu „TUNING“.
•Select „BAND“ by pressing the P̃ key.
•Select the channel type C or S by pressing the ୵ /
୴
keys.
•Select „CHANNEL“ by pressing the P̃ key.
•Enter the channel number with the numerical keys.
For two-digit channel numbers, press the - - key before entering
the number.
When the station is found, the TV set is tuned to the centre of the
related channel. If the picture is still not clear, you can use the fine
tuning function to improve it.
•Select „STORE“ by pressing the
P̃
key and confirm the operati-
on by pressing the
୴
key.
• Close the menu by pressing the key.
Fine tuning
If the picture of a received station is not very clear, both the picture
and sound quality can be improved by fine tuning.
•Press the BLUE key to select the menu „INSTALL.“.
•Select „TUNING“ with the keys P̅/P̃.
•Press the key
୴
to open the menu „TUNING“.
•Select „FINE TUNING“ by pressing the
P̃
key and then adjust the
tuning with the ୵ /
୴
keys until the picture is clear and the sound
is good.
•Select „STORE“ by pressing the P̃ key and confirm the operati
on
by pressing the
୴
key.
•Close the menu by pressing the key.
Station logo (name)
The A.P.S function displays the station logo in the station table only if
the station is received clearly. If no station logo is shown, you can
enter it manually as follows:
•Press the BLUE key to select the menu „INSTALL.“.
•Press the key ୴ to open the menu „TUNING“.
•Select „NAME“ by pressing the P̅/P̃ keys.
•Select the first character position by pressing the ୴ key.
•Select the desired character by pressing the P̅/P̃ keys.
•Select the next character position by pressing the ୴ key, select
the desired character with the P̅/P̃ keys, and so on.
•After input of the complete logo (maximum length: four charac-
ters), press the ୴ key to exit from the logo field.
•Select „STORE“ by pressing the P̃ keys and confirm the opera-
tion by pressing the ୴ key.
TV
TV