Metrik Mobile Electronics MCD-797 Radio User Manual


 
Page 10 Page 5
9. POWER BUTTON
Press any button except the EJECT and RELEASE button to turn on the unit.
It also can turn on the unit to insert disc, MMC/SD card or USB bar into their compartment or
socket. Press PWR button hold for more than 0.5 seconds to turn off the unit.
10. STEREO/MONO BUTTON
Press the button to select STEREO or MONO sound mode.
11. MUTE BUTTON
This button serves to switch the MUTED state on/off.
Press the MUTE button to suppress the loudspeaker temporarily, and press
again to resume listening. The muted state will be also released when the
MODE, BAND, SEL button is pressed and VOL knob on the front panel is used.
12. PRESET STATION [ 1-6 ] AND TOP/CDP, INT, RPT, RDM BUTTONS.
A).RADIO MODE
When pressed short, these keys select a preset station directly,
When pressed longer than one seconds, current station is stored in preset memory bank.
B).In MMC/SD, USB or disc mode, press TOP/CDP button to pause MMC/SD, USB or disc playback,
press it again to resume MMC/SD, USB or disc playback. Press it hold for more than about 0.5
seconds to play the first track of the MMC/SD, USB or disc.
C).In MMC/SD, USB mode, press INT button shortly to display M-INT and play the first 10 seconds
part of each track of all.
In CD/MP3 disc mode, press INT button shortly to display S-INT and play the first 10 seconds
part of each track of all.
In MMC/SD, USB or MP3 disc mode, Press INT button long to display D-INT and play the first
10 seconds part of each in current folder.
During INT mode, press INT button again to stop INT mode and retain playing the track currently
selected.
D).In MMC/SD, USB mode, press RPT button shortly to display M-RPT and play the current track
repeatedly.
In CD/MP3 disc mode, press RPT button shortly to display S-RPT and play the current track
repeatedly.
In MMC/SD, USB or MP3 disc mode, Press RPT button long to display D-RPT and play the
current folder repeatedly.
During RPT mode, Press RPT button again to cancel RPT mode.
E). In MMC/SD, USB mode, press RDM button shortly to display M-RDM and play the track of all in
random order.
In CD/MP3 disc mode, press RDM button shortly to display S-RDM and play the track of all in
random order.
In MMC/SD, USB or MP3 disc mode, Press RDM button long to display D-RDM play the track
in the current folder in random order.
During RDM mode, Press RDM button again to cancel RDM mode.
F). In MMC/SD, USB or MP3 disc mode, M6 and M5 is assigned as 10 TRACK up/down
when normal play.
WIRING DIAGRAM
PRECAUTIONS AND MAINTENANCE
1. If the car interior is extremely hot, as after being parked in the sun, do
not use the player until the car has been driven for a while to cool off
the interior.
2. The protective case is to safely keep the front panel.
3. The unit is designed for negative terminal of the battery which is connected
to the vehicle metal. Please confirm it before installation.
4. Do not allow the speaker wires to be shorted together when the unit is
switched on. Otherwise it may overload or burn out the power amplifier.
5. Do not install the detachable panel before connecting the wire.
FRONT PANEL
PROTECTIVE CASE
Note:
1.Make sure to use onlyspeakers with 4 ohm load impedance.
2.Do not allow the auto antenna wire and ground touch each other.
RED R
WHITE L
AUX LINE IN
(BROWN)
+
+
+
+
YELLOW
ANTENNA PLUG
CONSTANT B+
BLACK(GND)
IGNITION SWITCH
RED (B+)
FRONT
REAR
RIGHT
FRONT
WHITE
WHITE/BLACK
GREEN/BLACK VIOLET/BLACK
GRAY/BLACK
GRAY
VIOLET
GREEN
REAR
LEFT
LOUDSPEAKER
-
-
-
-
BLUE AUTO ANT
FUSED
10A & 1A
FUSES
FILTER BOX
LOUDSPEAKER
RED R
WHITE L
FUSE 0.5A
RCA LINE OUT
(Rear Gray)
RED R
WHITE L
RCA LINE OUT
(Front Black)