Filter
Top Products
99-7603 KIT ASSEMBLY
4
FRONT
FACE-
RIGHT
SIDE
BRACKET
A
B
C
ISO MOUNT RADIO PROVISION
Mount the ISO Brackets to the after-
market radio using the screws sup-
plied with the radio.
(Figure B)
1
Note: The following modification
will need to be made to both
ISO brackets when using the ISO
mount radio provision. Cut or trim
the area shown from the ISO
bracket.
(Figure A)
Slide the radio into the radio housing
until it snaps into place.
(Figure C)
2
Attach the trim plate supplied with
the kit to the front of the radio hous-
ing assembly.
(Figure C)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.