Filter
Top Products
99-7603 KIT ASSEMBLY
3
A
B
DIN MOUNT RADIO PROVISION
Slide the DIN cage into the Radio
Housing and secure by bending the
metal locking tabs outward.
(Figure A)
Note: You will need to remove the
aftermarket radio’s trim ring if
equipped.
1
Slide the aftermarket radio into the
cage until it snaps into place.
(Figure B)
2
Attach the trim plate supplied with the
kit to the front of the radio housing
assembly.
(Figure B)
3
Continue to final assembly.
*Note: Refer also to the instructions included with the aftermarket radio.