Filter
Top Products
Setting up the CD player
16
Unpacking
The 506 24-Bit CD Player comes in a box containing the
following components:
❍ 506 24-Bit CD Player.
❍ Meridian System Remote.
❍ 1 power cord.
❍ 1 optical connector blanking plug.
❍ This manual.
You are advised to retain the packing in case you need to
transport the unit.
To position the CD player
Do not place the CD player:
❍ In direct sunlight.
❍ Near heat sources, eg a radiator.
❍ On top of a power amplifier, as the heat generated may
damage the CD player.
However, it can be stacked under a 501 Control Unit and
504␣ Stereo FM Tuner, if you have these Meridian components in
your system.
In common with all CD players, the 506 24-Bit CD Player emits
some radio-frequency signals. Therefore, you should try to keep
all power cables and network leads away from signal cables,
including audio, antenna, and loudspeaker cables.
Radio interference
FCC Warning: This equipment generates and can radiate radio
frequency energy and if not installed and used correctly in
accordance with our instructions may cause interference to
radio communications or radio and television reception. It has
been type-tested and complies with the limits set out in Subpart
J, Part 15 of FCC rules for a Class B computing device. These
limits are intended to provide reasonable protection against
such interference in home installations.
EEC: This product has been designed to comply with the limits
set out in EN55013 and EN55020C.