Filter
Top Products
Using the CD player
11
The Clear label will change to Store to indicate that the track is
stored.
To remove a track from a selection
Select the track you want to remove, as described above.
● Press Clear (remote only).
The Store label will change to Clear to indicate that the track has
been cleared.
To clear a programme
● Press • (Stop) twice.
The display will show C.P. (Cancel
Programme):
C.P.
A programme is automatically cancelled if you open the disc
drawer, or press Off.
To programme by specifying the
tracks you do not want to play
● Choose one of the tracks you do not want to play, as
described above.
The display will show the track
number; for example:
Track 12
● Press Clear (remote only).
The display will change to:
Clear 12
You should clear the track within two seconds, or it will begin to
play.
The track will be labelled Clear. All the other tracks are initially
programmed to play, and will be labelled Store.
To add a track to a selection
● Select the track you want to add, as described above.
● Press Store (remote only).